item divider Machine Building Systems
Automatic-Fastening Set

Automatic-Fastening Set


Show all 23 variants
On request

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

Automatic Fastener 8 N, St, black
Cap, PA grey
Hexagon Socket Head Cap Screw M6x30, St, bright zinc-plated
T-Slot Nut V 8 St M6, bright zinc-plated

Properties

Article number 0.0.489.96
Line line 8
Property bright zinc-plated
ESD ESD-safe = Yes
Weight m = 27 g
Delivery unit 1 set
Torque M = 14 Nm

Description

Special form of the Automatic-Fastening Set for installation in profiles with closed grooves. The groove is opened as shown below.
The Automatic Fastener is screwed into the groove in the end face of a Line 8 Profile (anti-clockwise thread). Hexagon Socket Head Cap Screw M6 is held captive in the internal thread of the Automatic Fastener.
The screw can be tightened through a pre-drilled hole 20 mm in diameter. A special L-Key 5 A/F N (0.0.492.59) is used for this purpose.
After tightening the screw of Automatic-Fastening Set 8 N, the hole is sealed with a Cap to prevent it from accumulating dust and to facilitate cleaning.

Assembly Instructions

The fastener is located inside the profile cavity. To access the fastening screw just drill a hole into the profile. The grey Cap is used to close the hole.
A T-Slot Nut is inserted into the groove in the second profile and forms the counterpart for the Automatic Fastener screw.
If this groove in the second profile is also closed, the T-Slot Nut must be inserted from either the profile’s end face or through a larger opening in the groove cover created beforehand.
Opening the closed groove of a Line 8 Profile in order to insert the T-Slot Nuts of two Automatic-Fastening Sets 8 NO.
Automatic-Fastening Sets should always be used in pairs.
The Automatic Fastener is screwed into the groove in the end face of a Line 8 Profile (anti-clockwise thread). Hexagon Socket Head Cap Screw M6 is held captive in the internal thread of the Automatic Fastener.
s = 6 A/F

Variants

Sort by

Line:  5 Material:  Steel (bright zinc-plated) Connection type:  Right angled Model:  One-sided Thread:  M4
Line:  5 Material:  Stainless steel Connection type:  Right angled Model:  One-sided Thread:  M4
Line:  6 Material:  Steel (bright zinc-plated) Connection type:  Right angled Model:  One-sided Thread:  M5
Line:  6 Material:  Stainless steel Connection type:  Right angled Model:  One-sided Thread:  M5
Line:  8 Material:  Steel (bright zinc-plated) Connection type:  Right angled Model:  One-sided Thread:  M6
Line:  8 Material:  Stainless steel Connection type:  Right angled Model:  One-sided Thread:  M6
Line:  8 Material:  Steel (bright zinc-plated) Connection type:  Right angled Model:  One-sided Thread:  M6
Line:  8 Material:  Stainless steel Connection type:  Right angled Model:  One-sided Thread:  M6
Line:  10 Material:  Steel (bright zinc-plated) Connection type:  Right angled Model:  One-sided Thread:  M8
Line:  12 Material:  Steel (bright zinc-plated) Connection type:  Right angled Model:  One-sided Thread:  M8
Line:  8 Material:  Steel (bright zinc-plated) Connection type:  Right angled Model:  One-sided Thread:  M6
Line:  5 Material:  Steel (bright zinc-plated) Connection type:  Right angled Model:  Both sides Thread:  M4
Line:  6 Material:  Steel (bright zinc-plated) Connection type:  Right angled Model:  Both sides Thread:  M5
Line:  6 Material:  Steel (bright zinc-plated) Connection type:  Right angled Model:  Both sides Thread:  M5
Line:  8 Material:  Steel (bright zinc-plated) Connection type:  Right angled Model:  Both sides Thread:  M6
Line:  8 Material:  Steel (bright zinc-plated) Connection type:  Right angled Model:  Both sides Thread:  M6
Line:  5 Material:  Steel (bright zinc-plated) Connection type:  Butting Model:  One-sided Thread:  M4
Line:  5 Material:  Stainless steel Connection type:  Butting Model:  One-sided Thread:  M4
Line:  6 Material:  Steel (bright zinc-plated) Connection type:  Butting Model:  One-sided Thread:  M5
Line:  6 Material:  Stainless steel Connection type:  Butting Model:  One-sided Thread:  M5
Line:  8 Material:  Steel (bright zinc-plated) Connection type:  Butting Model:  One-sided Thread:  M6
Line:  8 Material:  Stainless steel Connection type:  Butting Model:  One-sided Thread:  M6
Line:  12 Material:  Steel (bright zinc-plated) Connection type:  Butting Model:  One-sided Thread:  M8

Downloads

Accessoires

Applications

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23360290
UNSPSC 9.0
31162503
eCl@ss 6.0.1
23250311
eCl@ss 4.0
22041424
eCl@ss 11.0
23360290
eCl@ss 5.0
23250311
eCl@ss 4.1
22041424
eCl@ss 5.1
23250311
UNSPSC 7.0
31162503
eCl@ss 7.1
23360290
Customs tariff number
83024200