item divider Machine Building Systems
Central-Fastening Set P

Central-Fastening Set P


Show all 2 variants
On request

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

Clamping pin, St, bright zinc-plated
T-Slot Nut V 8 St M8, bright zinc-plated
Threaded sleeve with bore, St, bright zinc-plated
Grub screw M10, St, bright zinc-plated
Cap, PE, grey

Properties

Article number 0.0.619.69
Line line 8
ESD ESD-safe = Yes
Weight m = 44 g
Delivery unit 1 set

Description

Special variant of Central-Fastening Set 8 for connecting parallel Line 8 profiles. It enables individual, inherently stable partitions or partition elements to be rowed together quickly without time-consuming alignment procedures.
Unevenness in the floor can be compensated for by adjusting the height of the T-Slot Nut in the profile groove.
N.B.: At least 2 grooves always remain free for fitting panel elements into the profile grooves. Frame elements can also be connected to each other at an angle of 90° by positioning Central-Fastening Set P 8 appropriately.

Assembly Instructions

Profile processing: To accommodate the fastener sleeve, a ⌀14.2 mm counterbore is drilled into the side of one of the profiles being connected (using Step Drill 0.0.492.60) along with a ⌀8.2 mm fastening hole located perpendicular to this.
T-Slot Nut V 8 St M8 is fitted into the facing groove of the second profile and the clamping pin is screwed into this T-Slot Nut as far as the marking.
After the clamping pin has been inserted into the fastener sleeve, the profile connection is tightened with an M10 grub screw (tightening torque M = 15 Nm).

Variants

Sort by

Baureihe:  8 Nuttyp:  8 mm Gewinde:  M8
Baureihe:  6 Nuttyp:  6 mm Gewinde:  M6

Downloads

Accessoires

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23360290
UNSPSC 9.0
31162503
eCl@ss 11.0
23360290
eCl@ss 4.1
22041424
eCl@ss 5.1
23250311
eCl@ss 4.0
22041424
eCl@ss 6.0.1
23250311
eCl@ss 5.0
23250311
UNSPSC 7.0
31162503
eCl@ss 7.1
23360290
Customs tariff number
83024200